-
XD601SB-X15
There is a wild spirit here in the southern Appalachian mountains, from the dense rhodo and laurel forest, to the rushing rivers, and fog covered valleys. This is the same spirit that inspired the bootleggers and moonshine runners to soup up old cars, and illegally run shine from the law through the dirt roads that litter this landscape. They knew these roads like the back of their hands, and knew exactly how much speed they could hold in every turn, in every condition. This spirit lives in mountain bikers who call this place home.
The Factor 601 was designed to meet the demands of these riders. From the oversized alloy shell, EZO bearings, easy maintenance, and low friction coasting, these hubs are the perfect companion to a rip through trails you may or may not have permission to be on!
MSRP: 165.00
- Non-boost
- 32h or 28h
- Alloy Shell
- EZO Bearings
- Laser-cut Logo, CNC’d Flanges
- 6-Bolt Disc
- P.C.D 58
- CTF,L: 24
- CTF,R: 36
- F.T.F 69.5
-
XD602SB-X12
There is a wild spirit here in the southern Appalachian mountains, from the dense rhodo and laurel forest, to the rushing rivers, and fog covered valleys. This is the same spirit that inspired the bootleggers and moonshine runners to soup up old cars, and illegally run shine from the law through the dirt roads that litter this landscape. They knew these roads like the back of their hands, and knew exactly how much speed they could hold in every turn, in every condition. This spirit lives in mountain bikers who call this place home.
The Factor 601 was designed to meet the demands of these riders. From the oversized alloy shell, EZO bearings, easy maintenance, and low friction coasting, these hubs are the perfect companion to a rip through trails you may or may not have permission to be on!
MSRP: 315.00
- Available in XD, Shimano, Shimano Microspline
- Non-boost
- 32H
- 6 PAWL Freehub Body
- 60 Tooth Ratchet Ring
- 6-Bolt Disc
- 32h or 28h
- Alloy Shell
- EZO Bearings
- Laser-cut Logo, CNC’d Flanges
- PCD: 62
- CTF,L: 36
- CTF,R: 22
- Flange to Flange: 58
-
Boost – XD601SB-B15
There is a wild spirit here in the southern Appalachian mountains, from the dense rhodo and laurel forest, to the rushing rivers, and fog covered valleys. This is the same spirit that inspired the bootleggers and moonshine runners to soup up old cars, and illegally run shine from the law through the dirt roads that litter this landscape. They knew these roads like the back of their hands, and knew exactly how much speed they could hold in every turn, in every condition. This spirit lives in mountain bikers who call this place home.
The Factor 601 was designed to meet the demands of these riders. From the oversized alloy shell, EZO bearings, easy maintenance, and low friction coasting, these hubs are the perfect companion to a rip through trails you may or may not have permission to be on!
MSRP: 165.00
- Boost
- 28 or 32h
- Alloy Shell
- EZO Bearings
- Laser-cut Logo, CNC’d Flanges
- 6-Bolt Disc
- P.C.D 58
- C.T.L 29
- C.T.R 41
- F.T.F 69.5
-
Boost – XD602SB-B12
There is a wild spirit here in the southern Appalachian mountains, from the dense rhodo and laurel forest, to the rushing rivers, and fog covered valleys. This is the same spirit that inspired the bootleggers and moonshine runners to soup up old cars, and illegally run shine from the law through the dirt roads that litter this landscape. They knew these roads like the back of their hands, and knew exactly how much speed they could hold in every turn, in every condition. This spirit lives in mountain bikers who call this place home.
The Factor 601 was designed to meet the demands of these riders. From the oversized alloy shell, EZO bearings, easy maintenance, and low friction coasting, these hubs are the perfect companion to a rip through trails you may or may not have permission to be on!
MSRP: 315.00
- Available in XD, Shimano, Shimano Microspline
- Boost 12X148
- 6 PAWL Freehub Body
- 60 Tooth Ratchet Ring
- 6-Bolt Disc
- 32h or 28h
- Alloy Shell
- EZO Bearings
- Laser-cut Logo, CNC’d Flanges
- PCD: 62mm
- CTF Left: 39mm
- CTF Right: 25mm
- FTF: 64mm
-
Super Boost – XD62SB-B12
There is a wild spirit here in the southern Appalachian mountains, from the dense rhodo and laurel forest, to the rushing rivers, and fog covered valleys. This is the same spirit that inspired the bootleggers and moonshine runners to soup up old cars, and illegally run shine from the law through the dirt roads that litter this landscape. They knew these roads like the back of their hands, and knew exactly how much speed they could hold in every turn, in every condition. This spirit lives in mountain bikers who call this place home.
The Factor 601 was designed to meet the demands of these riders. From the oversized alloy shell, EZO bearings, easy maintenance, and low friction coasting, these hubs are the perfect companion to a rip through trails you may or may not have permission to be on!
MSRP: 315.00
- Available in XD, Shimano, Shimano Microspline
- Super Boost 12X157
- 6 PAWL Freehub Body
- 60 Tooth Ratchet Ring
- 6-Bolt Disc
- 32h
- Alloy Shell
- EZO Bearings
- Laser-cut Logo, CNC’d Flanges
-
Smanie DH
Born to shred, born to win – the DH series saddle. The story behind the design of the DH saddle is one of legend. It was developed specifically to conquer the most demanding World Cup Downhill tracks on the planet. As mountain bike geometry design progresses, saddle design must also keep pace. Our partnership with the UR Team and legendary riders such as Mick and Tracey Hannah has helped us do just that. The rear cut-out and short design give riders the ability to run even longer dropper posts without fear of the rear tire buzzing the saddle when the suspension becomes super active. The DH series saddle also uses a modified GP series base to ensure the saddle is as light as possible while allowing for extra padding to prevent bruising on the inside of your legs when you need to lean the bike to extreme angles while cornering. Smanie DH series saddle: used by Pro downhill and enduro mountain bikers from Intense Factory Racing, the NS-Bikes – UR Team and dirt jump rider Alec Eklöw.
Extra Padding for Extra Comfort
Short saddles used in DH have been around for a few years now, but they mimicked road designs for far too long. Hard edges and thin padding on the sides of the saddle have been leaving bruises on the insides of aggressive riders’ legs for years. The Smanie DH series saddle comes with ample padding on the sides and the nose of the saddle to protect those who live to send it.
Eco-Friendly
It is at Smanie’s core to always be pushing the limits as to what we can do to make our saddles more environmentally friendly. We start by producing all of our products from recycled materials. That includes our covers, foam, bases, rails, and even our packaging.
Designed for Speed
The entire design of the DH series saddle was based around one thing and one thing only, SPEED. The race-inspired checkered flag design is our not-so-subtle nod to the legendary riders of the UR Team – Tracey and Mick Hannah.
Minimum Length for Maximum Shredding
The DH series saddle was designed to be the shortest possible while still complying with UCI regulations. At 244mm long it gives you the confidence to be able to run the longest dropper seat post you can find and know that you will be free from rear-wheel contact with your saddle when the dropper post is down.
A shell that is soft, but not too soft
Getting the shell of the saddle just right is crucial; a shell that flexes too much will cause your saddle to wear out prematurely or break, too-stiff, and it will be a very rough ride and cause undesirable pressure issues in some positions. The DH shell uses a modified version of the tried and true GP series shell, which is light enough for a World Tour road race, yet strong enough to win the World Cup DH overall title.
Riding Posture: Medium/Endurance
MSRP: $65.00
Shell Material Nylon+Fiberglass Rail Material Chromoly Cover Material Microfiber Padding Material Polyurethane Weight 233+/-5g Dimensions (mm) 244×133 Intended Use Downhill MTB, Enduro MTB, DJ, BMX -
Smanie DJ/BMX
Big air, Sick style – the DJ/BMX sport saddle uses the same technology developed for the DH saddle, but with steel rails, stealth black graphics. The story behind the design of the DH saddle is one of legend. It was developed specifically to conquer the most demanding World Cup Downhill tracks on the planet. As mountain bike geometry design progresses, saddle design must also keep pace. Our partnership with the UR Team and legendary riders such as Mick and Tracey Hannah has helped us do just that. Smanie DJ/BMX sport saddle: used by Pro downhill and enduro mountain bikers from the NS-Bikes – UR Team and dirt jump rider Alec Eklöw.
Cash is king
The DJ/BMX sport saddle uses the same tried and true design as our DH series saddles, but comes in at a price that won’t break the bank. But, we didn’t skimp on features, the DJ/BMX saddle uses the same high-end microfiber cover as our premium saddles, so you keep money in your pocket and steez on your ride.
Extra Padding for Extra Comfort
The Smanie DJ/BMX sport saddle comes with ample padding on the sides and the nose of the saddle to protect those who live to send it.
Eco-Friendly
It is at Smanie’s core to always be pushing the limits as to what we can do to make our saddles more environmentally friendly. We start by producing all of our products from recycled materials. That includes our covers, foam, bases, rails, and even our packaging.
A shell that is soft, but not too soft
Getting the shell of the saddle just right is crucial; a shell that flexes too much will cause your saddle to wear out prematurely or break, too-stiff, and it will be a very rough ride and cause undesirable pressure issues in some positions. The DH shell uses a modified version of the tried and true GP series shell, which is light enough for a World Tour road race, yet strong enough to win the World Cup DH overall title.
Riding Posture: Medium/Endurance
Note: The DJ/BMX sport saddle uses a two-rail system, not pivotal.
MSRP: $45.00
Shell Material PP Rail Material Steel Cover Material Polyurethane Padding Material Polyurethane Weight 271+/-5g Dimensions (mm) 244×133 Intended Use Downhill MTB, Enduro MTB, DJ, BMX -
HT AE06
The HT KA and AE06 Dirt series include the “big platform” pedal. In addition to the oversized foot area, the pedal is balanced evenly over the axle, which helps with a natural foot placement and heel drop. The AE06 comes with 11 replaceable grip pins per side for a high amount of grip between the pedals and your shoes.
MSRP: $160.00
Size: 105 x 110 x 17mm
Weight: 415 g / per pair
Material: aluminum extruded / CNC machined / sandblasted anodizing
CNC Spindle: machined with chromoly [silver]
Bearing: pantent trust bearings + dual DU bushings
Pins: Replaceable SAP (1/8″ x 9mm) pins / 1mm washer [silver] -
HT AN14A
The HT NANO series of pedals have been designed to offer the optimum balance of lightweight and reliable performance in all kinds of weather conditions. The low-profile design with a deep concave shape allows your foot to “sit-in” the pedal and improves grip/comfort. With heavy-duty sealed cartridge bearings and oversized spindles, the HT NANO pedal is one of the most durable pedals in the world.
MSRP: $80.00
Size: 94 x 95 x 17mm (center)
Weight: 360 g / per pair
Material: CNC machined / sandblasted anodizing
CNC Spindle: machined with chromoly [silver]
Bearing: 2 sealed / dual DU bushings
Pins: Replaceable – 10 pins each side -
HT Talon – AN71
The HT NANO series of pedals have been designed to offer the optimum balance of lightweight and reliable performance in all kinds of weather conditions. The low-profile design with a deep concave shape allows your foot to “sit-in” the pedal and improves grip/comfort. With heavy-duty sealed cartridge bearings and oversized spindles, the HT NANO pedal is one of the most durable pedals in the world.
MSRP: $100.00
Size: 105 x 105 x 17mm (center)
Weight: 430 g / per pair
Material: CNC machined / sandblasted anodizing
CNC Spindle: machined with chromoly [silver]
Bearing: 2 sealed / dual DU bushings
Pins: Replaceable – 11 pins each side -
HT M2 Ti
M2 Clipless XC Pedals are HT’s elite level pedal with titanium spindles. These pedals have been tested at World Cup and World Championship levels, ridden by World Champions Nino Schurter and Kate Courtney, tested in every condition imaginable and are arguably one of the best XC/CX clipless pedal options available. They weigh in at a remarkable 259 g per pair. Are made from extruded CNC optimized aluminum for ultimate strength to weight ratio. They have world-class mud, snow and ice clearing. They are very easy to engage and disengage. They also offer the most adjustable dual tension clip-in mechanism on the market. The adjustable clip tension allows riders to fine-tune their pedals dependent upon course/trail conditions. Available in multiple colors!
Note: If you use these pedals in conjunction with a street style shoe it is highly recommended to use the metal cleat shim that comes with the shoes or cleats. It will greatly improve the clip-in and release action.
MSRP: $240.00 – 275.00
Pedal Weight (pair) 259 g Cleat Weight (pair) 64 g Size 56 x 41 x 17.5 mm Body Material aluminum extruded / CNC machined Spindle CNC machined Titanium Pedal Bearings 686zz sealed bearing + IGUS bushings Cleat System X1E / X1 / X1F (HT exclusive system) Options colors -
HT ME03
HT ME03T is an elite level pedal with a magnesium body and Chromoly spindle. The HT EVO-MAG series of pedals have been designed to offer the best performance for Elite level riders. With HT magnesium extrusion technology, the EVO-MAG series is able to reduce the weight by 18%. The 11mm ultra-thin platform provides a low center of gravity and reduces the Q-factor.
MSRP: $195
Size: 102 x 96 x 11mm (center)
Weight: 260 g / per pair
Material: CNC machined magnesium
CNC Spindle: CNC machined Chromoly
Bearing: N+EVO / dual DU bushings
Pins: Replaceable – 10 pins each side – EVO1 GRIP